A 6ft flocked Christmas tree is an exceptional option for anyone who wants to get something really unique for their home. Flocking is a process of selecting various different branches and twigs of the appropriate size and shape, then arranging them into attractive patterns on a rigid base. The process of laying out the branches and other embellishments is done using various different methods, such as adhesives, metal hooks, pins and nails, and various wood products. This article is all about the basics of how to make your own 6ft flocked Christmas tree.
The first step is to prepare your home for the Christmas tree. This means that you need to make sure that all the nooks and crannies of your home are well covered with tarpaulins or some other waterproof material. In order to keep the water out, you should also seal any cracks or openings in your walls, windows and doors. Once your home has been protected, then you can start making the various layers of your own unique Christmas tree. These layers include the main body of the Christmas tree, which is of course made up of the per layer, followed by the three sections of metal mesh, including the perimeters of your three sections.
To make the base of your gift flocked Christmas tree, the following task is required. The first step is to remove all the existing or loose debris from your home. This includes old Christmas cards and packaging, old wrapping paper, old bulbs, old and cracked paint, old tree limbs and twigs, and any other pieces of trash. Once this is completed, you need to gather up all your materials, which consist of the following materials: two pieces of pvc pipe that can be drilled into the wall and the top section of a metal stand. The next thing you need to do is to drill holes into the ground, using the pvc pipe as a guide so that you can accurately level it. You will then need to add the extra top section of the metal stand and set the mesh aside, so that it may securely hold the tree in place.
After drilling holes, you need to prepare your Christmas tree. The first thing that you need to do is to glue each section to the pvc pipe with the help of the small screws. You should then bend the three sections to form three cross-hatches on the top section of the stand. At the same time, you should bend the two opposite sides of the three sections to form a ninety degree angle, which will help you secure the whole Christmas tree to the ground.
After this, you need to make the two bottom sections of the stand to meet at an angle, which will help you secure the decorations on the surface. However, you need to remember that the six foot flocked Christmas tree requires the support of the full tree stand. On the other hand, the seven foot flocked Christmas trees can be easily supported by the smaller stands. Once you are done with all these, it is time for you to string the ropes and hang the various decorations on the stand.
After stringsing are done, you need to clean the metal stand thoroughly with the help of a spray bottle filled with mild detergent. After cleaning, you can reassemble the parts back to the original position. Next, you need to tie the end of the cord with the help of strong yet soft ribbon. This ribbon will ensure that the cord is securely tied to the metal stand. You should remember that you should never stretch the cord beyond the breaking point.
Once the tree stand is ready, you can start decorating the tree in the traditional style of lighting up the branches and mistletoe. However, if you want something different from what people have seen before, then you can add some lights on the branches. For this purpose, you can use the small Christmas lights that are available at the store. In order to decorate the entire home or room, you should keep one hand behind the 6ft pvc material home decoration rope and another hand behind the Christmas lights.
Moreover, it is important to remember these following tips. First, if you have already purchased the metal or wooden stand for the 6ft pvc material, you should place the tree on the stand while being covered with the Christmas rope. Secondly, you should keep adding the extra Christmas lights as well as the twig or branches using your fingers. If you are wrapping the entire home with the 6ft pvc material, then covering the Christmas tree with the black metal stand will also help you to easily see the branches and the twigs.